AN-150 Yagi Antenna, 902-960 MHz, 13 dBd gain
Ruggedized mounting, all-welded joints, and complete weatherproofing are yours with AN-150 Yagi’s. The Yagis are mounted with two large stainless steel U-bolts. The elements are welded to the boom and the welds are on the inside of the boom to enhance electrical performance. Complete weatherability is ensured by enclosing the feed system in a potted PVC radome that will stand up to your most demanding requirements.
The pigtail feed will withstand a 50 pound pull, and makes connector weatherproofing a snap. There are no movable components, so you never have to worry about adjustments or loose parts. All hardware is stainless steel for longest life.
Key Features:
- 13dBd Gain
- All elements welded to the boom
- Mounting hardware included
- Antenna is supplied with a 19’ pigtail (RG213) and N female connector
| Specific Freq. (MHz) |
902-928 MHz |
| Gain (dBd) |
13 |
| Maximum Power Input (Watts) |
200 |
| Type |
13 Element Yagi |
| Bandwidth @ Rated VSWR (MHz) |
26 |
| H. Beamwidth |
40 Deg. |
| Vert. Beamwidth |
35 Deg. |
| Front to Back Ratio (dB) |
20 |
| VSWR @ 50 ohms |
1.5:1 |
| Gain (dBi) |
15.1 |
| Polarization |
Vertical or Horizontal |
| Lightning Prot. |
DC Ground |
|
| Size (HxWxD") |
53.5" |
| Weight |
3.12 lb |
| Rated Wind Velocity (RWV) |
125 |
| Wind Load, (sq ft) |
0.46 |
| Lateral Thrust @ RWV (lbs) |
Not Specified |
| Bending Moment @ RWV (ft lbs) |
Not Specified |
| Connector (direct) |
N Female |
| Jumper Included |
19" Pigtail |
| Connector Placement |
Jumper |
| Mount Hdw. Incl. |
U-Bolts |
| Incl. Hardware Fits |
up to 2-1/8" OD Pipe |
|
|