HARMONY SBX Remote I/O

The SBX Remote I/O is an intelligent remote monitoring device that is capable of bringing back performance data from remote sites. This unit is designed to be used in conjunction with Harmony Gateway products.

sbx-remote-io

The HARMONY SBX Remote I/O is a feature-packed device designed to add wireless control and manageability to your field devices in remote sites. It comes with a full 1 Watt transmitter and a 900 MHz Frequency Hopping Spread Spectrum (FHSS) radio that can communicate with any of Encom’s Harmony Gateway products at ranges of up to 20 miles.

The SBX:

  • is perfect for remotely controlling, scheduling, and monitoring remote school zone beacons
  • can detect and send an alarm to users on events such as a beacon lamp failure, low battery voltage, loss of A/C power and many others
  • works with a variety of sensors using two digital and two analog I/O’s for flexible application

Key Features

  • Cellular modem compatible
  • Internal device memory holds up to 16 schedules / 7-day plan / 365-day calendar
  • Calendars permanently stored in the device allow for autonomous operation
  • Integrated real-time clock with maintenance-free super cap backup & automatic DST/leap year adjustment
  • Event logging capabilities
  • Integrated GPS for precise geolocation
  • High-visibility LED indicators provide at-a-glance status info
  • Easily change schedules and set temporary overrides remotely

Specifications

GENERAL SPECS

Input Power: 6–30 VDC or 100–240 VAC
Power Consumption: 35 mA @ 12 VDC
LED indicators: PWR, RF Link, Schedule Status, Input 1 to 2 and Output 1 to 2
Operating Temperature: -40˚F to 176˚F (-40˚C to 80˚C), up to 95% humidity
Enclosure: Aluminum, Black Powder Coat
3.75” W x 1.75” H x 7.5” D

900 MHz RADIO SPECIFICATIONS

Technology: Frequency-hopping spread spectrum (FHSS) with repeater capability
Frequency Range: 902–928 MHz, ISM Band
Output Power: 1 mW, 10 mW, 100 mW, 1000 mW
Receiver Sensitivity: -110 dBm @ 10-6BER
Error Checking: 32-bit CRC
Encryption: 32-bit
Antenna Port: RP TNC-F
Certification: FCC, Industry Canada

CONNECTIVITY

Programming port USB 2.0, Mini-B Receptacle
900 MHz Radio Yes
GPS Yes
Configuration, Monitoring & Control Stratos Elite and ControlPAK
Protocol Proprietary

INDUSTRIAL I/O

Digital Inputs 2
Digital Input Range 0 to 30 V (ground activated)
Digital Outputs 2
Digital Output Range Open collector (3 to 30 VDC, max. 500 mA) or SPDT 15 amp relay
Analog Input 2, o to 50 VDC, 12-bit resolution
Analog Output 2, o to 5 VDC, 12-bit resolution
I/O Connectors Flying leads

REMOTE SITE MONITORING FUNCTIONS

Input voltage and current monitoring + logging
Beacon lamp On/Off status monitoring + logging
Beacon lamp On current monitoring + logging
Solar panel voltage monitoring + logging
Battery current charge/discharge monitoring+logging
Temperature monitoring + logging
Receive signal strength monitoring + logging
GPS location monitoring
Beacon lamp fail detect + alarm
Low battery voltage detect + alarm
Solar panel disconnect detect + alarm
Battery disconnect detect + alarm
Loss of A/C detect + alarm
Integrated battery backup Yes
Number of calendars 16
Calendar periods 365 days
Event/calendar 16
Manual override Yes
Input Power 6–30 VDC or 100–240 VAC
Power Consumption 150 mA @ 12 VDC
LED indicators PWR, RF Link, LAN–ACT and LAN LINK
Operating temperature -40˚F to 176˚F (-40˚C to 80˚C), 
up to 95% humidity
Enclosure 4.75” W x 1.73” H x 3.75” D
Technology: Frequency-hopping spread spectrum (FHSS) with repeater capability
Frequency Range: 902–928 MHz, ISM Band
Output Power: 1 mW, 10 mW, 100 mW, 1000 mW
Receiver Sensitivity: -110 dBm @ 10-6BER
Error Checking: 32-bit CRC
Encryption: 32-bit
Antenna Port: RP TNC-F
Certification: FCC, Industry Canada
Programming port USB 2.0, Mini-B Receptacle
900 MHz Radio Yes
GPS Yes
Configuration, Monitoring & Control Stratos Elite and ControlPAK
Protocol Proprietary
Digital Inputs 2
Digital Input Range 0 to 30 V (ground activated)
Digital Outputs 2
Digital Output Range Open collector (3 to 30 VDC, max. 500 mA) or SPDT 15 amp relay
Analog Input 2, o to 50 VDC, 12-bit resolution
Analog Output 2, o to 5 VDC, 12-bit resolution
I/O Connectors Flying leads
Input voltage and current monitoring + logging
Beacon lamp On/Off status monitoring + logging
Beacon lamp On current monitoring + logging
Solar panel voltage monitoring + logging
Battery current charge/discharge monitoring+logging
Temperature monitoring + logging
Receive signal strength monitoring + logging
GPS location monitoring
Beacon lamp fail detect + alarm
Low battery voltage detect + alarm
Solar panel disconnect detect + alarm
Battery disconnect detect + alarm
Loss of A/C detect + alarm
Integrated battery backup Yes
Number of calendars 16
Calendar periods 365 days
Event/calendar 16
Manual override Yes

ORDERING OPTIONS

SBX Remote IO: Wireless I/O Controller w/ 900 MHz FHSS radio
BH-3200A: Harmony CPC Cable Harness (DC only – Standard pinout)
BH-3200C: Harmony CPC Cable Harness (DC only – TXDOT specs)
EH-500-AC KIT: Harmony SBX Remote, AC, Panel KIT
EH-500-DC KIT: Harmony SBX Remote, DC, Solar, Panel KIT

Stratos Elite

Stratos Elite –– our complete network visualization management system, is a powerful yet simple Windows-based interface for rapid wireless network deployment. It provides connectivity, visibility and manageability to sites and systems that were previously not online.

With Stratos Elite, you can:

  • Manage your Encom devices from a friendly user interface
  • Remotely control and configure your Encom devices
  • View and optimize the performance of your wireless network
  • Diagnose network and communication issues in real-time

Contact us for more information on Stratos Elite!

stratos-elite-demo
Contact Us

Please fill out the form below and we’ll get back to you as soon as possible.

Not readable? Change text. captcha txt