Harmony Gateway Advanced
Gateway Advanced I/O is an intelligent monitoring device with I/O functionality. If users find they need I/O capabilities at the master site, the Gateway Advanced I/O is the optimal solution.
The GATEWAY ADVANCED I/O provides remote monitoring and control functions and is perfectly suited to:
- act as a master gateway between a user’s network and a larger network of 2 or more remote devices
- provide both gateway and I/O capabilities to a single site, consolidating cost and equipment
- intelligently monitor both analog and digital inputs and trigger different kinds of outputs
Each unit is equipped with a built-in LAN port for easy connection to a cell modem or IP network and a 900 Mhz FHSS radio to communicate with remotes (SBX, IO8) via RF. The ability to connect to remotes via RF aids in cost efficiency by allowing end-users to cut down on the number of cell plans needed in a particular deployment.
Key Features
- Offers single cellular connection for an entire system
- SNMP enabled for interoperability with other central software systems
- Internal device memory holds up to 16 schedules / 16 events per schedule / 365-day calendar scheduling capacity
- Integrated real-time clock with maintenance-free super cap backup & automatic DST/leap year adjustment
- Precise timekeeping via NTP server synchronization
- Facilitates event logging for other Harmony devices
- Easily change schedules and set temporary overrides remotely
Specifications
GENERAL SPECS
| Input Power: | 6–30 VDC or 100–240 VAC |
| Power Consumption: | 165 mA @ 12 VDC |
| LED indicators: | PWR, RF Link, Schedule Status, Input 1 to 2, Output 1 to 2, LAN-ACT, LAN LINK |
| Operating Temperature: | -40˚F to 176˚F (-40˚C to 80˚C), up to 95% humidity |
| Enclosure: | Aluminum, Black Powder Coat 3.75” W x 1.75” H x 7.5” D |
900 MHz RADIO SPECIFICATIONS
| Technology: | Frequency-hopping spread spectrum (FHSS) with repeater capability |
| Frequency Range: | 902–928 MHz, ISM Band |
| Output Power: | 1 mW, 10 mW, 100 mW, 1000 mW |
| Receiver Sensitivity: | -110 dBm @ 10-6BER |
| Error Checking: | 32-bit CRC |
| Encryption: | 32-bit |
| Antenna Port: | RP TNC-F |
| Certification: | FCC, Industry Canada |
CONNECTIVITY
| Ethernet Port (10/100Base-T) | 1 |
| 900 MHz Radio | Yes (Optional in NR model) |
| GPS | Yes |
| Configuration, Monitoring & Control | Stratos Elite and ControlPAK, SNMP, WEBUI |
| Protocol | HTTP, SNMP V1, V2 & V3, SMTP, FTP and DHCP |
INDUSTRIAL I/O
| Digital Inputs | 2 |
| Digital Input Range | 0 to 30 V (ground activated) |
| Digital Outputs | 2 |
| Digital Output Range | Open collector (3 to 30 VDC, max. 500 mA) or SPDT 15 amp relay |
| Analog Input | 2, 0 to 50 VDC, 12-bit resolution |
| Analog Output | 2, 0 to 5 VDC, 12-bit resolution |
| I/O Connectors | Flying leads |
REMOTE SITE MONITORING FUNCTIONS
| Input voltage and current | monitoring + logging |
| Beacon lamp On/Off status | monitoring + logging |
| Beacon lamp On current | monitoring + logging |
| Solar panel voltage | monitoring + logging |
| Battery current | charge/discharge monitoring+logging |
| Temperature | monitoring + logging |
| Receive signal strength | monitoring + logging |
| GPS location | monitoring |
| Beacon lamp fail | detect + alarm |
| Low battery voltage | detect + alarm |
| Solar panel disconnect | detect + alarm |
| Battery disconnect | detect + alarm |
| A/C power loss | detect + alarm |
| Integrated battery backup | Yes |
| Number of calendars | 16 |
| Calendar periods | 365 days |
| Event/calendar | 16 |
| Manual override | Yes |
| Input Power: | 6–30 VDC or 100–240 VAC |
| Power Consumption: | 165 mA @ 12 VDC |
| LED indicators: | PWR, RF Link, Schedule Status, Input 1 to 2, Output 1 to 2, LAN-ACT, LAN LINK |
| Operating Temperature: | -40˚F to 176˚F (-40˚C to 80˚C), up to 95% humidity |
| Enclosure: | Aluminum, Black Powder Coat 3.75” W x 1.75” H x 7.5” D |
| Technology: | Frequency-hopping spread spectrum (FHSS) with repeater capability |
| Frequency Range: | 902–928 MHz, ISM Band |
| Output Power: | 1 mW, 10 mW, 100 mW, 1000 mW |
| Receiver Sensitivity: | -110 dBm @ 10-6BER |
| Error Checking: | 32-bit CRC |
| Encryption: | 32-bit |
| Antenna Port: | RP TNC-F |
| Certification: | FCC, Industry Canada |
| Input voltage and current | monitoring + logging |
| Beacon lamp On/Off status | monitoring + logging |
| Beacon lamp On current | monitoring + logging |
| Solar panel voltage | monitoring + logging |
| Battery current | charge/discharge monitoring+logging |
| Temperature | monitoring + logging |
| Receive signal strength | monitoring + logging |
| GPS location | monitoring |
| Beacon lamp fail | detect + alarm |
| Low battery voltage | detect + alarm |
| Solar panel disconnect | detect + alarm |
| Battery disconnect | detect + alarm |
| A/C power loss | detect + alarm |
| Integrated battery backup | Yes |
| Number of calendars | 16 |
| Calendar periods | 365 days |
| Event/calendar | 16 |
| Manual override | Yes |
ORDERING OPTIONS
Gateway Adv IO: Ethernet I/O Gateway Controller w/ 900 MHz FHSS radio
Gateway Adv IO NR: Ethernet I/O Gateway Controller (no radio)
BH-3200A: Harmony CPC Cable Harness (DC only – Standard pinout)
BH-3200C: Harmony CPC Cable Harness (DC only – TXDOT specs)
BH-3201: Harmony CPC A/C Module (Standard pinout)
BH-3201A: Harmony CPC A/C Module (TXDOT specs)
EH-600-AC KIT: Harmony Gateway Advanced IO, AC., Panel KIT
EH-600-DC KIT: Harmony Gateway Advanced IO, DC, Solar, Panel KIT
Gateway Adv IO NR: Ethernet I/O Gateway Controller (no radio)
BH-3200A: Harmony CPC Cable Harness (DC only – Standard pinout)
BH-3200C: Harmony CPC Cable Harness (DC only – TXDOT specs)
BH-3201: Harmony CPC A/C Module (Standard pinout)
BH-3201A: Harmony CPC A/C Module (TXDOT specs)
EH-600-AC KIT: Harmony Gateway Advanced IO, AC., Panel KIT
EH-600-DC KIT: Harmony Gateway Advanced IO, DC, Solar, Panel KIT
Stratos Elite
Stratos Elite –– our complete network visualization management system, is a powerful yet simple Windows-based interface for rapid wireless network deployment. It provides connectivity, visibility and manageability to sites and systems that were previously not online.
With Stratos Elite, you can:
- Manage your Encom devices from a friendly user interface
- Remotely control and configure your Encom devices
- View and optimize the performance of your wireless network
- Diagnose network and communication issues in real-time
Contact us for more information on Stratos Elite!
